Torque Tools are used for a wide range of applications including opening and closing valves and installing and removing flying leads.

Showing all 15 results

3 Stage Manifold

This provides three preset control pressures with flow and direction control. This is ideal for torque tool control where the three pressures may represent breakout, run- ning and maximum torque settings.

 

Download Spec Sheet

Forum Class 1-4 Torque Tool

This torque tool has been specifically developed to provide the highest level of performance. It has integral torque and turns counting sensors for closed loop control.

 

Download Spec Sheet

Forum Class 5 Torque Tool

This torque tool has been specifically developed to provide the highest level of performance using a high specification motor and robust gearbox in an efficient, low weight assembly.

 

Download Spec Sheet

Forum Class 6-7 Torque Tool

This torque tool has been specifically developed to address the increasing requirement for a 17kNm Tool. The interface is based on the ISO 13628-8 Fig 18 Class 7, with the exception of the length of the nose of the tool, this is based on the industry standard.

 

Download Spec Sheet

Manipulator Operated Torque Tool

The tool is used to operate ISO Class 1-2 interfaces without the use of a torque tool.

 

Download Spec Sheet

Subsea Verification Unit 1-4

This unit has been developed to give sub-sea confirmation of torque tool calibration. It consists of a standard class 1-4 torque reaction bucket with a compact torque sensor. To change shafts only one bolt has to be undone.

 

Download Spec Sheet

Torque Clutch Tool

The Scorpion Subsea ROV Operated Torque Limiting Tool (Torque Clutch Tool) is a modular, seal free device with a compliant drive designed for manipulator deployment and operation. The Torque Limiter ensures the safe operation of all low torque interfaces when the output torque of a given manipulator or torque tool cannot be assured.

 

Download Spec Sheet

Torque Tool Adaptor (17D-17H)

Download Spec Sheet

 

The adaptor is used to convert from ISO 13628-8 Class 4 (API 17D) to API 17H High Torque interface.

Torque Tool Control System

The Torque Tool Control System allows the user, from the surface, to adjust the torque and speed.

 

Download Spec Sheet

Universal Subsea Display

The Universal Subsea Display (USD), displays information from a wide range of sensor types. It is viewed using ROV cameras or directly by divers. The USD is housed in a robust anodized aluminium alloy housing with an integrated compensator.

 

Download Spec Sheet

Verification Unit 1-4

This unit is used to give pre-dive surface confirmation of the torque tool calibration. It consists of a standard ISO class 1-4 torque reaction bucket with sturdy base and built in torque sensor.

 

Download Spec Sheet

Verification Unit 5

This unit is used to give pre-dive surface confirmation of the torque tool calibration.

 

Download Spec Sheet

Verification Unit 6-7

This unit is used to give pre-dive surface confirmation of the torque tool calibration. It consists of a standard ISO class 6/7 torque reaction bucket with sturdy base and built in torque sensor.

 

Download Spec Sheet

Verification Unit 7

This unit is used to give pre-dive surface confirmation of the torque tool calibration. It consists of a standard ISO class 7 torque reaction bucket with sturdy base and built in torque sensor.

Download Spec Sheet